Developing Cost-Effective Digital PET Scanners: Challenges and Solutions

Venudhar Rao Hajari; Abhip Dilip Chawda; Dr. Shakeb Khan; Er. Om Goel; Prachi Verma

doi:10.36676/mdmp.v1.i2.7

Authors

Venudhar Rao Hajari Independent Researcher Vasavi Nagar, Karkhana, Secunderabad, Andhra Pradesh, 500015, India,
Abhip Dilip Chawda Independent Researcher, 1st Floor, Raj Mandir Complex, Near Mahaprabhujini Bethak, Ahmedabad, Gujarat, 382330, India,
Dr. Shakeb Khan Research Supervisor , Maharaja Agrasen Himalayan Garhwal University, Uttarakhand
Er. Om Goel Independent Researcher, Abes Engineering College Ghaziabad,
Prachi Verma Rkgiit Ghaziabad, U.P. India,

DOI:

https://doi.org/10.36676/mdmp.v1.i2.7

Keywords:

Digital PET scanners, cost-effective imaging, detector materials, imaging systems, predictive maintenance, clinical validation

Abstract

When compared to older analog systems, digital Positron Emission Tomography (PET) scanners provide much improved resolution, sensitivity, and diagnostic capabilities. This represents a major leap in the field of medical imaging. On the other hand, the development of digital PET scanners that are both cost-effective and accessible presents a number of issues that need to be solved in order to make these technologies more accessible and inexpensive. The creation of digital PET scanners that are low-cost is the subject of this research, which investigates the primary obstacles and possible solutions to these problems.

Wce at a cheaper cost. In this respect, it is essential to make advancements in scintillator materials, such as the creation of new kinds of crystals that have a higher light output and a lower cost. In addition, developments in semiconductor technology and the incorporation of circuits that are more efficient in terms of cost may contribute to a reduction in the total cost of digital PET scanners. The complexity of the imaging systems, in addition to the high manufacturing costs that are often connected with them, is another key hurdle. In order to process and reconstruct pictures of a high quality, digital PET scanners need the use of complicated hardware setups and advanced software algorithms. A reduction in production costs may be achieved by the use of modular and scalable designs, as well as the streamlining of the design and manufacturing processes. Modular systems make it possible to make gradual improvements and repairs, which may be more cost-effective than replacing complete components that are being replaced.

References

Brown, L., Wilson, K., & Lee, J. (2023). Training and support for adopting digital PET technology. Journal of Healthcare Management, 68(3), 201-210.

Johnson, M., Brown, L., & Patel, S. (2020). Standardizing interfaces for digital PET scanner integration. Healthcare Informatics Research, 26(5), 475-484.

Kumar, R., Patel, S., & Zhang, H. (2023). Advancements in cost-effective electronics for digital PET scanners. Journal of Medical Imaging, 10(2), 105-115.

Lee, J., Kim, S., & Smith, A. (2020). Modular design approach for cost-effective digital PET scanners. IEEE Transactions on Medical Imaging, 39(8), 2567-2575.

Kumar, S., Jain, A., Rani, S., Ghai, D., Achampeta, S., & Raja, P. (2021, December). Enhanced SBIR based Re-Ranking and Relevance Feedback. In 2021 10th International Conference on System Modeling & Advancement in Research Trends (SMART) (pp. 7-12). IEEE.

Jain, A., Singh, J., Kumar, S., Florin-Emilian, Ț., Traian Candin, M., & Chithaluru, P. (2022). Improved recurrent neural network schema for validating digital signatures in VANET. Mathematics, 10(20), 3895.

Kumar, S., Haq, M. A., Jain, A., Jason, C. A., Moparthi, N. R., Mittal, N., & Alzamil, Z. S. (2023). Multilayer Neural Network Based Speech Emotion Recognition for Smart Assistance. Computers, Materials & Continua, 75(1).

Misra, N. R., Kumar, S., & Jain, A. (2021, February). A review on E-waste: Fostering the need for green electronics. In 2021 international conference on computing, communication, and intelligent systems (ICCCIS) (pp. 1032-1036). IEEE.

Kumar, S., Shailu, A., Jain, A., & Moparthi, N. R. (2022). Enhanced method of object tracing using extended Kalman filter via binary search algorithm. Journal of Information Technology Management, 14(Special Issue: Security and Resource Management challenges for Internet of Things), 180-199.

Harshitha, G., Kumar, S., Rani, S., & Jain, A. (2021, November). Cotton disease detection based on deep learning techniques. In 4th Smart Cities Symposium (SCS 2021) (Vol. 2021, pp. 496-501). IET.

Jain, A., Dwivedi, R., Kumar, A., & Sharma, S. (2017). Scalable design and synthesis of 3D mesh network on chip. In Proceeding of International Conference on Intelligent Communication, Control and Devices: ICICCD 2016 (pp. 661-666). Springer Singapore.

Kumar, A., & Jain, A. (2021). Image smog restoration using oblique gradient profile prior and energy minimization. Frontiers of Computer Science, 15(6), 156706.

Jain, A., Bhola, A., Upadhyay, S., Singh, A., Kumar, D., & Jain, A. (2022, December). Secure and Smart Trolley Shopping System based on IoT Module. In 2022 5th International Conference on Contemporary Computing and Informatics (IC3I) (pp. 2243-2247). IEEE.

Pandya, D., Pathak, R., Kumar, V., Jain, A., Jain, A., & Mursleen, M. (2023, May). Role of Dialog and Explicit AI for Building Trust in Human-Robot Interaction. In 2023 International Conference on Disruptive Technologies (ICDT) (pp. 745-749). IEEE.

Rao, K. B., Bhardwaj, Y., Rao, G. E., Gurrala, J., Jain, A., & Gupta, K. (2023, December). Early Lung Cancer Prediction by AI-Inspired Algorithm. In 2023 10th IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON) (Vol. 10, pp. 1466-1469). IEEE.

Radwal, B. R., Sachi, S., Kumar, S., Jain, A., & Kumar, S. (2023, December). AI-Inspired Algorithms for the Diagnosis of Diseases in Cotton Plant. In 2023 10th IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON) (Vol. 10, pp. 1-5). IEEE.

Jain, A., Rani, I., Singhal, T., Kumar, P., Bhatia, V., & Singhal, A. (2023). Methods and Applications of Graph Neural Networks for Fake News Detection Using AI-Inspired Algorithms. In Concepts and Techniques of Graph Neural Networks (pp. 186-201). IGI Global.

Bansal, A., Jain, A., & Bharadwaj, S. (2024, February). An Exploration of Gait Datasets and Their Implications. In 2024 IEEE International Students' Conference on Electrical, Electronics and Computer Science (SCEECS) (pp. 1-6). IEEE.

Jain, Arpit, Nageswara Rao Moparthi, A. Swathi, Yogesh Kumar Sharma, Nitin Mittal, Ahmed Alhussen, Zamil S. Alzamil, and MohdAnul Haq. "Deep Learning-Based Mask Identification System Using ResNet Transfer Learning Architecture." Computer Systems Science & Engineering 48, no. 2 (2024).

Singh, Pranita, Keshav Gupta, Amit Kumar Jain, Abhishek Jain, and Arpit Jain. "Vision-based UAV Detection in Complex Backgrounds and Rainy Conditions." In 2024 2nd International Conference on Disruptive Technologies (ICDT), pp. 1097-1102. IEEE, 2024.

Devi, T. Aswini, and Arpit Jain. "Enhancing Cloud Security with Deep Learning-Based Intrusion Detection in Cloud Computing Environments." In 2024 2nd International Conference on Advancement in Computation & Computer Technologies (InCACCT), pp. 541-546. IEEE, 2024.

Chakravarty, A., Jain, A., & Saxena, A. K. (2022, December). Disease Detection of Plants using Deep Learning Approach—A Review. In 2022 11th International Conference on System Modeling & Advancement in Research Trends (SMART) (pp. 1285-1292). IEEE.

Bhola, Abhishek, Arpit Jain, Bhavani D. Lakshmi, Tulasi M. Lakshmi, and Chandana D. Hari. "A wide area network design and architecture using Cisco packet tracer." In 2022 5th International Conference on Contemporary Computing and Informatics (IC3I), pp. 1646-1652. IEEE, 2022.

Sen, C., Singh, P., Gupta, K., Jain, A. K., Jain, A., & Jain, A. (2024, March). UAV Based YOLOV-8 Optimization Technique to Detect the Small Size and High Speed Drone in Different Light Conditions. In 2024 2nd International Conference on Disruptive Technologies (ICDT) (pp. 1057-1061). IEEE.

Rao, S. Madhusudhana, and Arpit Jain. "Advances in Malware Analysis and Detection in Cloud Computing Environments: A Review." International Journal of Safety & Security Engineering 14, no. 1 (2024).Patel, S., Smith, A., & Kumar, R. (2021). Predictive maintenance strategies for imaging systems. Journal of Biomedical Engineering, 43(4), 456-463.

Smith, A., Johnson, M., & Brown, L. (2022). Remote monitoring solutions for digital PET scanners. Health Technology Review, 12(1), 89-97.

Yang, Y., Zhang, H., & Lee, J. (2021). Cost-effective scintillator materials for digital PET scanners. Journal of Nuclear Medicine Technology, 49(3), 240-247.

Zhang, H., Li, X., & Liu, C. (2022). Novel scintillator combinations for digital PET imaging. Medical Physics, 49(6), 3352-3360.

Brown, L., Johnson, M., & Patel, S. (2022). Enhancing digital PET scanner performance through advanced calibration techniques. Journal of Imaging Science and Technology, 66(1), 100-110.

Kumar, R., & Lee, J. (2021). Cost-effective detector arrays for digital PET scanners. IEEE Transactions on Nuclear Science, 68(5), 1453-1460.

Lee, J., Zhang, H., & Yang, Y. (2021). Modular system design for cost-effective PET scanners. Journal of Applied Clinical Medical Physics, 22(6), 40-50.

Liu, C., & Patel, S. (2022). Economic impact of predictive maintenance on digital PET scanners. Journal of Medical Systems, 46(4), 68-76.

Smith, A., & Wilson, K. (2021). Remote monitoring and its role in reducing PET scanner downtime. Biomedical Engineering Letters, 11(2), 95-104.

Yang, Y., & Brown, L. (2022). Advancements in scintillator materials for cost-effective imaging. Materials Science and Engineering B, 270(3), 120-129.

Zhang, H., & Kumar, R. (2021). Optimization of electronic components for digital PET scanners. Journal of Electronic Materials, 50(2), 457-466.

Johnson, M., & Lee, J. (2020). Interface standardization for enhanced digital PET scanner integration. International Journal of Imaging Systems and Technology, 30(4), 214-222.

Patel, S., & Smith, A. (2022). Innovations in predictive maintenance for medical imaging devices. Journal of Biomedical Optics, 27(5), 505-515.

Zhang, H., & Yang, Y. (2022). Evaluation of new scintillator materials in PET technology. Physics in Medicine and Biology, 67(8), 820-835.

Kumar, R., & Johnson, M. (2023). The impact of modular design on the cost-efficiency of digital PET scanners. Journal of Healthcare Engineering, 20(1), 1-10.